Industry information-Huibaixin (Shandong) new material Co., Ltd

Site Search

Index
About
Product
Case
News
Contact
CH

current position： Home > News Center > Industry information

Testing method for ink performance

2022-10-12 14:44:59

Formaldehyde resin, relative density 1.14 ～ 1.19. The melting point is 88~108 ℃. The glass transition temperature is t50 ～ 75 ℃. Soluble in ethanol, isopropanol, toluene, ethyl acetate, acetone, but...

More +
How do we ensure proper curing of UV inks

2022-09-24 09:43:58

Heat resistance selection of color and model. Because some colors are not resistant to water boiling, it is easy to see color exudation when water boiling. Gold and silver ink should be used with caut...

More +
How do we ensure the proper curing of UV ink?

2022-09-02 14:29:39

The curing of the ink film when it passes through the curing unit once is very important. Proper curing can avoid the deformation, over curing, rewetting and under curing of the substrate to the great...

More +
Research and development of four kinds of waterborne anticorrosive coatings

2022-08-12 10:59:11

Traditional industrial coatings contain a large amount of organic solvents, which are mostly volatilized during construction and drying. This not only seriously pollutes the environment and endangers...

More +
Differences between water-based coatings and solvent based coatings

2022-07-20 09:27:40

The differences between water-based coatings and solvent based coatings can be compared from the following aspects: different resins of coating systems are different: the resins of water-based coating...

More +
Will the polycarbonate (PC) film turn yellow when using UV photo oxidation resin?

2022-07-01 09:46:01

1. What is the relationship between the setting parameters (Watts / inch) on the UV curing lamp and the readings we see on the radiometer (Watts / cm2 or milliwatts / cm2)? Watt / inch is the power un...

More +
Construction technology of waterborne coating

2022-06-09 10:11:11

Storage of water-based coating base material shall be stored at 5-25 ℃. The tank cover shall be closed immediately after opening the tank for use to prevent scaling. The storage life of unopened coati...

More +
What are the factors affecting the stability or shelf life of UV ink?

2022-05-12 10:17:55

An important factor affecting the stability of ink is the storage of ink. UV inks are usually stored in plastic cartridges rather than metal cartridges, because the plastic container has a certain oxy...

More +
How much do you know about waterborne wood paint

2022-04-14 10:17:49

In recent years, the coating industry has set off a vigorous wave of "oil to water". Many brands have successfully launched water-based paint products. Now it is becoming more and more hot....

More +
What are the four basic components of coatings

2022-03-31 15:36:47

Coatings generally consist of four basic components: film forming material (resin, emulsion), pigment (including body pigment), solvents and additives (auxiliaries).1 the film forming material is the...

More +

Every page shows 10 Article,Share 34 Article home Previous Page

123 4

2/4

Next Page last

contact us

Mobile: 1565016980

Tel: 0531-68658365

Address: No. 59, Gongye South Road, high tech Zone, Jinan, Shandong

Sweep and pay

Huibaixin (Shandong) new material Co., Ltd copyright 鲁ICP备2022000158号-1 Site map | RSS | XML

Technical Support：赢搜科技

contact us

Mobile: 1565016980

Tel: 0531-68658365

Address: No. 59, Gongye South Road, high tech Zone, Jinan, Shandong

Huibaixin (Shandong) new material Co., Ltd copyright 鲁ICP备2022000158号-1 Technical Support：赢搜科技

About

Product

The company mainly produces and sells polyketone resin, aldehyde-ketone resin, UV light curing resin, rosin modified resin, chloro-vinegar resin, wax powder, dispersant, bentonite and other fine chemicals, providing suitable and professional products and solutions for coatings, inks, adhesives.

Case

News

News Center

News Center News

NewsRecommend

contact usContact Us

Huibaixin (Shandong) new material Co., Ltd

Testing method for ink performance

How do we ensure proper curing of UV inks

How do we ensure the proper curing of UV ink?

Research and development of four kinds of waterborne anticorrosive coatings

Differences between water-based coatings and solvent based coatings

Will the polycarbonate (PC) film turn yellow when using UV photo oxidation resin?

Construction technology of waterborne coating

What are the factors affecting the stability or shelf life of UV ink?

How much do you know about waterborne wood paint

What are the four basic components of coatings

Walk into us

Product Center

news information

contact us

Sweep and pay

contact us